|
The
PD-39P Panel Post Driver ensures fast erection of temporary
panel fencing. Because the PD-39P is so light in weight,
the operator must pull down on the spring loaded handles
to provide the correct weight for driving.
| Top
Cover: |
|
Alloy
steel, treated to remove all mill scale, O-Ring sealed.
|
| |
|
|
| Body: |
|
Ductile
iron casting, with excellent wear resistant characteristics.
90° air inlet cast into the body. |
| |
|
|
| Piston: |
|
Alloy
steel heat treated with a ground surface with hard chrome
plate. Designed with 2 round valve ports to give better
lubrication and load distribution to the valve ring
while running. |
| |
|
|
| Master
Chuck: |
|
The
2 1/8" (53.98 mm) I.D. master chuck is of an all
welded, reinforced steel and tubing construction. The
chuck is equipped with extra long mounting bolt tubes.
The handle mounts with three keys, each to insure maximum
life, are placed on one side of the chuck to allow the
post driver to be easily operated from one side of a
panel fence. |
| |
|
|
| Handles: |
|
30
7/8" long, zinc plated handles constructed of steel
tubing, with three keyways for maximum life and four
springs to help isolate the operator from vibration.
HI Tech pre-lubed bushings help to add long life to
the handles. |
| |
|
|
| Throttle
Valve: |
|
Each
unit includes a Rhino Stainless Steel Throttle Valve.The
valve is equipped with a lever lock for safety. |
| |
|
|
| Fasteners: |
|
S.A.E.Grade
5 bolts with belleville lock washers. All fasteners
are plated. |
| |
|
|
| Air
Consumption: |
|
42
CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2) |
|
|
|
|
