| Top
Cover: |
|
Alloy
steel, treated to remove all mill scale, O-Ring sealed.
|
| |
|
|
| Body: |
|
Ductile
iron casting, with excellent wear resistant characteristics.
90° air inlet cast into the body. |
| |
|
|
| Piston: |
|
Alloy
steel heat treated with a ground surface with hard chrome
plate. Designed with 2 round valve ports to give better
lubrication and load distribution to the valve ring
while running. |
| |
|
|
| Master
Chuck: |
|
The
3 5/8" (92 mm) I.D.master chuck is of an all welded,
reinforced steel and tubing construction.The chuck is
equipped with extra long mounting bolt tubes, chuck
adapter attachment lugs and handle mounts with three
keys each to insure maximum life. |
| |
|
|
| Handles: |
|
25
1/4"long,zinc plated handles constructed of steel
tubing, with three keyways for maximum life and four
springs to help isolate the operator from vibration.
HI Tech pre-lubed bushings help to add long life to
the handles. |
| |
|
|
| Throttle
Valve: |
|
Each
unit includes a Rhino Stainless Steel Throttle Valve.The
valve is equipped with a lever lock for safety. |
| |
|
|
| Fasteners: |
|
S.A.E.Grade
5 bolts with belleville lock washers. All fasteners
are plated. |
| |
|
|
| Chuck
Adapters: |
|
Standard
chuck adapters constructed of a welded combination of
alloy steel and tubing are available in the following
sizes:3" (6.2 mm) I.D., 2 1/2" (63.5 mm) I.D.
and 2" (50.8 mm) I.D. Plus three adapters for channel
posts.
|
| |
|
|
| Air
Consumption: |
|
42
CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2) |
