| The
PD-140 is the perfect choice for driving Beams, Round, Square
or Rectangular Tubing, Wood Posts, Stakes or any shape up
to 4".
| Top
Cover: |
|
Ductile
iron casting, high in strength and ductility has 1"
(25.4 mm) diameter handles with chain loop designed
into the cover for easy handling and carrying. O-Ring
sealed. |
| |
|
|
| Body: |
|
Ductile
iron casting, with excellent wear resistant characteristics.
The air inlet is cast into the body and tapped with
with 3/4" NPT female threaded ports, along with
1" (25.4 mm) diameter side handles for easy handling.
Chuck bolts pass thru the lower body flange into tapped
holes in the chuck mounting plate allowing special chucks
to be made in a wide variety of shapes and sizes. |
| |
|
|
| Piston: |
|
Alloy
steel heat treated with a ground surface with hard chrome
plate. Designed with 2 round valve ports to give better
lubrication and load distribution to the valve ring
while running. |
| |
|
|
| Master
Chuck and Chuck Adapters: |
|
The
4 1/4" (107.9 mm) I.D. master chuck is of an all
welded, reinforced steel and tubing construction. The
chuck is equipped with extra long chuck adapter attachment
lugs. Standard chuck adapters are available in the following
sizes: 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm)
I.D., 3 5/8" (92 mm) I.D. and three channel post
chuck adapters for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft
and 3 to 4 lbs/ft posts. A chuck is available to drive
4" x 4" (101 mm x 101 mm) wood posts and a
chuck and drive cap are available to drive 4" x
6" (101 mm x 152 mm) H column guard rail posts. |
| |
|
|
| Fasteners: |
|
S.A.E.Grade
5 bolts with belleville lock washers. All fasteners
are plated. |
| |
|
|
| Air
Consumption: |
|
64
CFM (1.81 m3/min) @ 100 PSI (7 kg/cm2) |
|
