|
The
PD-110 is easily operated by one man and is the perfect
choice for driving telespar and various types of steel posts.
| Top
Cover: |
|
Ductile
iron casting, high in strength and ductility has 1"
(25.4 mm) diameter handles and chain loop designed into
the cover for easy handling and carrying. O-Ring sealed. |
| |
|
|
| Body: |
|
Ductile
iron casting, with excellent wear resistant characteristics.
The air inlet is cast into the body and tapped with
3/4" NPT female threaded ports, along with
1" (25.4 mm) diameter side handles for easy handling.
Chuck bolts pass thru the lower body flange into tapped
holes in the chuck mounting plate allowing special chucks
to be made in a wide variety of shapes and sizes. |
| |
|
|
| Piston: |
|
Alloy
steel heat treated with a ground surface with hard chrome
plate. Designed with 2 round valve ports to give better
lubrication and load distribution to the valve ring
while running. |
| |
|
|
| Master
Chuck and Chuck Adapters: |
|
The
4 1/4" (107.9 mm) I.D. master chuck is of an all
welded, reinforced steel and tubing construction. The
chuck is equipped with extra long chuck adapter attachment
lugs. Standard chuck adapters are available in the following
sizes: 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm)
I.D., 3" (76.2 mm) I.D., 3 5/8" (92 mm) I.D.
and three channel post chuck adapters for 1.2 to 1.5
lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. |
| |
|
|
| Fasteners: |
|
S.A.E.Grade
5 bolts with belleville lock washers. All fasteners
are plated. |
| |
|
|
| Air
Consumption: |
|
64
CFM (1.81 m3/min) @ 100 PSI (7 kg/cm2) |
|
|
|
|
| |
|
Model
and/or
Part Number |
|
Specifications |
| |
|
|
|
|
| |
|
PD-110
070014
|
|
Medium/Heavy
Duty Post Driver with a 4 1/4" (107.9 mm) I.D. Master
Chuck, uses 64 CFM (1.81 m3/min) @ 100 psi (7 kg/cm2). Approx.
Wt. 107 lbs (48.5 kg) |
| |
|
|
|
|
| 1 |
|
070622 |
|
3
5/8" (92 mm) I.D. Chuck Adapter |
| |
|
|
|
|
| 2 |
|
070623 |
|
3"
(76.2 mm) I.D. Chuck Adapter |
| |
|
|
|
|
| 3 |
|
070624 |
|
2
1/2" (63.5 mm) I.D. Chuck Adapter |
| |
|
|
|
|
| 4 |
|
070625 |
|
2"
(50.8 mm) I.D. Chuck Adapter |
| |
|
|
|
|
| 5 |
|
070628 |
|
Channel
Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts |
| |
|
|
|
|
| 6 |
|
070629 |
|
Channel
Post Chuck Adapter - 2 to 2.75 lbs/ft Posts |
| |
|
|
|
|
| 7 |
|
070630 |
|
Channel
Post Chuck Adapter - 3 to 4 lbs/ft Posts |
|
|
| |
Note:
If the post you intend to drive is tubular in construction
and the inside dimension is larger than 3.5", you
will need to use a drive cap. Please call us for assistance
in determining your needs. |
|
